高交流电小交流电经过多次实验发现台仪（耐电孤经过多次实验发现台仪）-（统计机调节）

High voltage low current tester (arc resistance tester) - (computer control)

类产称谓称：耐电弧试验机

Product name: electric arc resistance tester

食品类型：NDH-A

Product model: NDH - A

满足了基准：GB/T 1411-2002《膏状接地物料耐高压得很低的电压电流弧光发出电的试验检测》（共同IEC  61621-1997）及ASTM D495等完全符合要求的完全符合要求制定开发的，并完全符合IEC 149、UL 746A等经过多次实验发现形式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

包括可用于条件及能力：

本可靠性试验仪是采用用途于高压电机、电气和生活费电气等餐饮行业的电工维修用塑胶件、硅橡胶胶和接地带漆等接地带的原料的耐电弧放电放电效果评估，主使用于液态接地带的原料如：塑胶件、贴膜、硅橡胶、云母片、淘瓷、磨砂玻璃、接地带油、接地带漆、瓦楞纸等媒介的耐电弧放电放电效果软件测试；

本研究设计机由来电脑掌控正常运行，会显视到现阶段工作研究设计工作状态及研究设计时候，研究设计完成后并储存到现阶段工作研究设计参数，并可印刷.标实践报告模板。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为左右两混合式的结构，下部分为基本操作整体，上半部为经过多次实验发现箱。

2 本企业产品应用*新自动化的控制技术应用，凭借选定步骤（IEC或ASTM）可智能开展现场实验，并在租赁上界面显示检测全过程和的结果。

3 **功能很好，抗扰乱效率强，检查导致精高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断时间间隔精度：需小于 ±10ms

2 调压器电容量：2kVA

3 特殊试验台电流：12.5kV

4 实验室检测的电压要求：±3%

5 直流电的控制要求：±10%  瞬时电流测定控制精度：1.5%

6 电极片对试件有压力：（0.5±0.05）N

7 电级材料：钨棒

8 电级时间：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 施用坏境高温：（23±2）℃

10 选用学习环境温湿度：（50±5）%

11 主机电源：220V±5%  50Hz  10A

12 试验报告    技巧：   国家标准下载/美标/10 mA 反复/20 mA 间隔/30 mA陆续/40 mA间断

13 可靠性试验步骤有以下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 食品类型：

NDH-A    耐电弧放电试验检测仪-微机调整

NDH-B    耐焊弧实验设计仪-触模屏操纵

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！